Skip To Content

Single Acting Cylinders

AiROYAL - Single Acting Cylinders Pt.1

Universal Mounting

Models: 315, 316
Universal Mounting
Push Stroke – with internal retracting spring. For rod-head side or end mounting. Port in rod-head for drain or vent only

Blind-Head End Mounting

Models: 325, 326
Blind-Head End Mounting
Push Stroke – with internal retracting spring. Port in rod-head for drain or vent only

Pivot Mounting

Models: 335, 336
Pivot Mounting
Push Stroke – with internal retracting spring. Port in rod-head for drain or vent only

Trunnion Mounting.

Models: 345, 346.
Trunnion Mounting.
Push Stroke – with internal retracting spring. Port in rod-head for drain or vent only. Trunnion located midway between cylinder heads unless otherwise requested. Specify dimension “KK” for other positions.

Overall Length ***

Bore 5/8″ 1″ 11/2″ 2″
up to 1″
(S t r o k e)
311/16 327/32 37/8 415/16
1″ – 2″
(S t r o k e)
53/16 511/32 53/6 67/16
2″ – 3″
(S t r o k e)
73/16 711/32 73/8 87/16
3″ – 4″
(S t r o k e)
93/16 911/32 93/8 107/16

Bore 5/8″ Air 5/8″ Oil 1″ Air 1″ Oil 11/2″ Air 11/2″ Oil 2″ Air 2″ Oil
up to 1″
(S t r o k e)
311/16 41/16 327/32 49/32 37/8 43/8 415/16 51/2
1″ – 2″
(S t r o k e)
53/16 59/16 511/32 525/32 53/8 57/8 73/8 715/16
2″ – 3″
(S t r o k e)
73/16 79/16 711/32 725/32 73/8 77/8 93/8 915/16
3″ – 4″
(S t r o k e)
93/16 99/16 911/32 925/32 93/8 97/8 113/8 1115/16

Bore 5/8″ Air 5/8″ Oil 1″ Air 1″ Oil 11/2″ Air 11/2″ Oil 2″ Air 2″ Oil
up to 1″
(S t r o k e)
4 43/8 47/32 421/32 45/8 51/8 513/16 63/8
1″ – 2″
(S t r o k e)
51/2 57/8 523/32 65/32 61/8 65/8 81/4 813/16
2″ – 3″
(S t r o k e)
71/2 77/8 723/32 85/32 85/8 81/8 101/4 1013/16
3″ – 4″
(S t r o k e)
91/2 97/8 923/32 105/32 101/8 105/8 121/4 1213/16

Bore 5/8″ Air 5/8″ Oil 1″ Air 1″ Oil 11/2″ Air 11/2″ Oil 2″ Air 2″ Oil
up to 1″
(S t r o k e)
35/16 311/16 313/32 327/32 33/8 37/8 43/8 415/16
1″ – 2″
(S t r o k e)
413/16 53/16 429/32 511/32 47/8 53/8 613/16 73/8
2″ – 3″
(S t r o k e)
613/16 73/16 629/32 711/32 67/8 73/8 813/16 93/8
3″ – 4″
(S t r o k e)
813/16 93/16 829/32 911/32 87/8 93/8 1013/16 113/8

BORE Dim. 5/8" 1" 11/2" 2"
D 5/16 1/2 5/8 3/4*
E 5/16 _24 1/2 _20 5/8 _18 3/4 _16
G 1/8 1/4 1/4 13/8
H 11/16 13/32 11/16 13/16
I 3/4 1 1 11/4
J 1 11/4 11/4 11/2
K 17/8 131/32 2 21/4
M 3/16** 1/4 3/8 3/8
N 7/16 5/8 3/4 13/32
P 7/16 1/2 1/2 5/8
Q 11/4 13/8 17/16 15/8
S 11/32 15/32 11/16 7/8
T 1/2 3/4 3/4 1
Y 3/4 7/8 11/8 17/16
Z 5/16 1/2 5/8 7/8
* 1" Dia. Rod Std. on `HP' & 'SHP' Models (`E' THD. == 3/4 -16)
**5/8" Bore cylinders are drilled only (not counter-bored) for mounting screws
***Single acting cylinders with internal spring not recommended for Stroke longer than 4"

AiROYAL - Single Acting Cylinders Pt.2

Universal Mounting

Models: 315-ES, 316-ES, 317-ES, 318-E
Universal Mounting
Pull Stroke – with internal retracting spring. For rod-head side or end mounting. Port in blind head for drain or vent only

Blind-Head End Mounting

Models: 325-ES, 326-ES, 327-ES, 328-E
Blind-Head End Mounting
Pull Stroke – with internal retracting spring. Port in blind head for drain or vent only

Pivot Mounting

Models: 335-ES, 336-ES, 337-ES, 338-E
Pivot Mounting
Pull Stroke – with internal retracting spring. Port in blind head for drain or vent only

Trunnion Mounting.

Models: 346-ES, 346-ES, 347-ES, 348-ES
Trunnion Mounting.
Pull Stroke – with internal retracting spring. Port in blind head for drain or vent only. Trunnion located midway between cylinder heads unless otherwise requested. Specify dimension “KK” for other positions.

Overall Length ***

BORE 5/8″ 1″ 11/2″ 2″
up to 1″
(S t r o k e)
45/16 47/16 47/16 59/16
1″ – 2″
(S t r o k e)
513/16 515/16 515/16 8
2″ – 3″
(S t r o k e)
713/16 715/16 715/16 10
3″ – 4″
(S t r o k e)
913/16 915/16 915/16 12

BORE 5/8″ 1″ 11/2″ 2″
up to 1″
(S t r o k e)
411/16 47/8 415/16 61/8
1″ – 2″
(S t r o k e)
63/16 63/8 67/16 89/16
2″ – 3″
(S t r o k e)
83/16 83/8 87/16 109/16
3″ – 4″
(S t r o k e)
103/16 103/8 107/16 129/16

BORE 5/8″ 1″ 11/2″ 2″
up to 1″
(S t r o k e)
5 51/4 511/16 7
1″ – 2″
(S t r o k e)
61/2 63/4 73/16 97/16
2″ – 3″
(S t r o k e)
81/2 83/4 93/16 117/16
3″ – 4″
(S t r o k e)
101/2 103/4 115/16 137/16

BORE 5/8″ 1″ 11/2″ 2″
up to 1″
(S t r o k e)
45/16 47/16 47/16 59/16
1″ – 2″
(S t r o k e)
513/16 515/16 515/16 8
2″ – 3″
(S t r o k e)
713/16 715/16 715/16 10
3″ – 4″
(S t r o k e)
913/16 915/16 915/16 12
BORE Dim. 5/8" 1" 11/2" 2"
D 5/16 1/2 5/8 3/4*
E 5/16 _24 1/2 _20 5/8 _18 3/4 _16
G 1/8 1/4 1/4 13/8
H 11/16 13/32 11/16 13/16
I 3/4 1 1 11/4
J 1 11/4 11/4 11/2
K 17/8 131/32 2 21/4
M 3/16** 1/4 3/8 3/8
N 7/16 5/8 3/4 13/32
P 7/16 1/2 1/2 5/8
Q 11/4 13/8 17/16 15/8
S 11/32 15/32 11/16 7/8
T 1/2 3/4 3/4 1
Y 3/4 7/8 11/8 17/16
Z 5/16 1/2 5/8 7/8
* 1" Dia. Rod Std. on `HP' & 'SHP' Models (`E' THD. == 3/4 -16)
**5/8" Bore cylinders are drilled only (not counter-bored) for mounting screws
***Single acting cylinders with internal spring not recommended for Stroke longer than 4"